Applied Aviation Research Center, PrecisionHawk continue UAS collaborationApplied Aviation Research Center, PrecisionHawk continue UAS collaboration
Research important for quantifying risks associated with flying UAVs.
August 22, 2017
The Applied Aviation Research Center on Kansas State University's Polytechnic Campus is continuing its work with PrecisionHawk, a provider of advanced commercial drone technologies, on operational testing with unmanned aircraft systems (UAS).
This partnership comes from PrecisionHawk's continued work with the Federal Aviation Administration's (FAA) Pathfinder program, which involves industry partners exploring expansion of unmanned aerial vehicle (UAV) operations in commercial airspace. PrecisionHawk is headquartered Raleigh, N.C.
This summer, PrecisionHawk asked Kansas State Polytechnic to participate in phase three of the Pathfinder program. Phase three is testing the reliability of technological aids when flying beyond visual line of sight (VLOS), and aims to provide an operational risk assessment to FAA to help further define safety regulations for operating an unmanned aircraft in commercial airspace.
"This research is important for quantifying the risks associated with unmanned aircraft operations beyond visual line of sight of the operator," said Andi Meyer, research program manager at the Applied Aviation Research Center. "Technological aids are needed for such operations, but they still need validation and reliability testing before the industry can move forward. This field testing provides data for PrecisionHawk's operational risk assessment that is a critical piece of the regulatory approval process."
During the experiments, taking place on Knopf farm in central Kansas, volunteers used computers with PrecisionHawk's proprietary drone mapping software program, which provided a map view of where a UAV was flying and monitored when and where the manned aircraft entered the airspace. The participants then used the software to survey the area and to ultimately determine if an adjustment of the UAV's flight path was necessary to ensure safe operations.
Kansas State Polytechnic and PrecisionHawk previously collaborated in summer 2016 on a series of controlled field experiments to observe pilots' decision-making when flying in extended VLOS, or EVLOS. The studies were conducted to determine an acceptable safety level in response time of drone pilots when visually detecting a manned intruder in their airspace. As a result of this collaboration, PrecisionHawk was able to attain the only EVLOS waiver in the nation from FAA for commercial UAV operations.
When flying beyond VLOS, pilots are unable to visually see their unmanned aircraft. As part of the field test, PrecisionHawk used its traffic and conflict-alerting system, LATAS, which provides unmanned tracking and displays ground and air obstacles in real time. In support of a drone safety solution, MITRE Corp. developed a set of visual warnings to augment that display and aid pilot decision-making using the LATAS framework. The conflict alerting and display system allows pilots to maintain a well-clear area — keeping their flight path clear of other air traffic to avoid air-to-air collisions. Results of the field test will help inform requirements for such systems.
"Kansas State Polytechnic has an outstanding team in the UAS lab and, because of our success in Pathfinder phase two, was my obvious choice to partner in phase three," Allison Ferguson, director of airspace research for PrecisionHawk, said. "Along with the data we are able to provide the FAA, this program also provides advantages to Kansas State Polytechnic students by exposing them to active research in the field."
Phase three is the final phase of the FAA Pathfinder program. All results are provided to FAA for consideration upon completion of the field tests.
During the Pathfinder program's field project, the Applied Aviation Research Center also hosted MITRE Corp. in conducting small UAV non-cooperative sensor field testing using low-cost sensors. These sensors are designed to be flown on small, unmanned aircraft to sense and avoid other aircraft. The center's involvement in this live flight testing involved flying a manned Cessna 172 aircraft from Kansas State Polytechnic in a series of maneuvers near the UAV's mounted sensors. MITRE Corp.'s competitive data-collection exercise was designed to provide insights into a range of detect-and-avoid capabilities that could be useful for small UAV missions.
"Feedback from MITRE and the participating companies was terrific," said Kurt Carraway, UAS executive director of the Applied Aviation Research Center. "We're proud to be able to contribute to this exciting work, which we hope will ultimately help propel the UAS industry forward by introducing new technologies that enhance aviation safety to further promote the successful integration of UAS into the national airspace. We look forward to continuing this relationship with MITRE in conducting future tests."
You May Also Like
Iowa turkey flocks confirmed with HPAIOct 23, 2023
Current Conditions for
New York, NY
Enter a zip code to see the weather conditions for a different location.
Colostrum in New York Holsteins: Metabolic Indicators and affected by prepartum nutritionNov 16, 2023
Michigan Milk Producers Association announces strategic investment in GoodSport NutritionNov 28, 2023
Emerging domestic disease threatsNov 29, 2023
Soybeans climb on South American weather woesAug 01, 2023