Feedstuffs is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Method to turn ag waste into renewable fuel being tested

Jim Parkin iStock ethanol plant with corn field in the front
Engineer testing method that could cut cost of collecting and delivering corn plant material for making ethanol by 20%.

Although the stalks and leaves of a corn plant can be turned into ethanol, the high cost of collecting, storing and transporting the material has limited its use in producing the fuel.

Ajay Shah, an agricultural engineer with The Ohio State University College of Food, Agricultural & Environmental Sciences (CFAES), is testing a method that could cut the cost of collecting and delivering corn plant material for making ethanol by as much as 20%.

Shah just received a $1 million grant from the U.S. Department of Agriculture to test the effectiveness of a new method that harvests and transports corn plants intact -- the ears together with the stalks. Shah’s strategy has the potential to spur the lagging cellulosic ethanol sector — ethanol produced from the inedible parts of plants, most commonly corn plants with U.S. production.

“We have an opportunity to significantly cut the cost of taking agricultural waste and turning it into a sustainable fuel,” said Shah, an assistant professor in the CFAES department of food, agricultural and biological engineering.

Gasoline purchased at the pump includes up to 10% ethanol, which is alcohol produced by fermenting corn kernels. Currently, ethanol produced from the inedible parts of the corn plant makes up less than 1% of the U.S. ethanol market. 

There’s potential for tremendous growth if there’s a cheaper way to collect and deliver the plant material to turn it into ethanol, said Shah, an assistant professor and head of the BioSystems Analysis Lab at CFAES.

The system still would gather about half of the corn plant, leaving the remaining dry corn stalks in the field to prevent erosion and return organic material and its associated nutrients to the soil.

“It could have a huge economic impact if it’s adopted by the biorefineries,” Shah said of the new strategy for collecting and delivering corn plants with ears and stalks intact.

Through the grant, Shah will work with farm equipment companies to develop machinery that could be used for the system and could eventually be put on the market. 

“We’re working on improving the efficiency of everything from harvest to processing at a biorefinery,” Shah said. “We are focused on reducing the cost and environmental impacts of logistics.”

Collecting and delivering the plant material can cost up to $100 per acre, which can account for up to half the cost of producing ethanol with that plant material, Shah said.

The system Shah is testing involves harvesting the corn plant so the ears and a portion of the stalks are not separated in the field but are sent as a single package to the biorefinery. Separating the corn kernels from the rest of the plant requires a combine, which is expensive and currently is used in the field for only a few months of the year.

If the farmer instead were to collect the cobs and stalks at the same time, those could then be baled and stored on the farm or at a centralized storage location. A stationary machine that separates the grain from the rest of the plant could operate throughout the year, maximizing its use.

Additional cost savings can result from the delivery of the bales. Baling the corn plant material has been a challenge because it is difficult to compact into dense bales, resulting in additional costs to transport it. The bed of a truck may be filled before its weight capacity is met. As such, Shah has been testing various ways to compact and bale the whole corn plant, including the ears with grain, so the bales are more dense. The more densely packed the bales, the cheaper it is to transport them, he noted.

TAGS: Business
Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.